Skip to content

Motion in the plane

Open the part27 slides

Motion in the plane

Explico Playground — Motion

Course Author

Content with changes after version 1.0.0, not yet released

Where the point is

A position is two coordinates on one clock

r(t)=(x(t), y(t))\explain{motion.position}{\mathbf{r}}(\explain{motion.time}{t}) = \bigl(\explain{coordinate-x}{x}(\explain{motion.time}{t}),\ \explain{coordinate-y}{y}(\explain{motion.time}{t})\bigr)
r\explain{motion.position}{\mathbf{r}} Positiont\explain{motion.time}{t} Timex\explain{coordinate-x}{x} Horizontal coordinatey\explain{coordinate-y}{y} Vertical coordinate

Two coordinate systems

Polar coordinates give distance and direction

  • The Polar radius is the distance from the origin
  • The Polar angle is the direction, counterclockwise from the horizontal axis
ρ=x2+y2,φ=arctan⁡ ⁣(yx)\explain{polar-radius}{\rho} = \sqrt{\explain{coordinate-x}{x}^{2} + \explain{coordinate-y}{y}^{2}}, \qquad \explain{polar-angle}{\varphi} = \arctan\!\left(\frac{\explain{coordinate-y}{y}}{\explain{coordinate-x}{x}}\right)
ρ\explain{polar-radius}{\rho} Polar radiusφ\explain{polar-angle}{\varphi} Polar angle

The arctangent sees only the right half-plane

  • The arctangent gives angles from −90∘-90^{\circ} to 90∘90^{\circ} only
  • The points (1,1)(1, 1) and (−1,−1)(-1, -1) have the same ratio y/x\explain{coordinate-y}{y}/\explain{coordinate-x}{x}
  • For a point on the left, add 180∘180^{\circ}

Polar to Cartesian works in every quadrant

x=ρcos⁡(φ),y=ρsin⁡(φ)\explain{coordinate-x}{x} = \explain{polar-radius}{\rho}\cos(\explain{polar-angle}{\varphi}), \qquad \explain{coordinate-y}{y} = \explain{polar-radius}{\rho}\sin(\explain{polar-angle}{\varphi})
  • A launch velocity is polar: a speed and an angle above the horizontal
  • The same two products give its horizontal and vertical components

The same two points in both systems

Table 1.1.1Two points in both coordinate systems. Points A and B, each with its Cartesian coordinates x and y and its polar coordinates ρ and φ.
PointHorizontal coordinate (meters)x (m)\explain{coordinate-x}{x}\ \text{(m)}Vertical coordinate (meters)y (m)\explain{coordinate-y}{y}\ \text{(m)}Polar radius (meters)ρ (m)\explain{polar-radius}{\rho}\ \text{(m)}Polar angle (degrees)φ (°)\explain{polar-angle}{\varphi}\ \text{(°)}
A34553.1
B8.665.001030.0

How the point moves

Velocity is the time derivative of position

v(t)=drdt=(dxdt, dydt)\explain{velocity-vector}{\mathbf{v}}(\explain{motion.time}{t}) = \frac{d\explain{motion.position}{\mathbf{r}}}{d\explain{motion.time}{t}} = \left(\frac{d\explain{coordinate-x}{x}}{d\explain{motion.time}{t}},\ \frac{d\explain{coordinate-y}{y}}{d\explain{motion.time}{t}}\right)
  • A dot is the Time derivative: v(t)=(x˙, y˙)\explain{velocity-vector}{\mathbf{v}}(\explain{motion.time}{t}) = (\explain{motion.time-derivative}{\dot{\explain{coordinate-x}{x}}},\ \explain{motion.time-derivative}{\dot{\explain{coordinate-y}{y}}})
v\explain{velocity-vector}{\mathbf{v}} Velocity vector˙\explain{motion.time-derivative}{\dot{}} Time derivative

Acceleration is the derivative once more

a(t)=dvdt=d2rdt2\explain{motion.acceleration}{\mathbf{a}}(\explain{motion.time}{t}) = \frac{d\explain{velocity-vector}{\mathbf{v}}}{d\explain{motion.time}{t}} = \frac{d^{2}\explain{motion.position}{\mathbf{r}}}{d\explain{motion.time}{t}^{2}}
a\explain{motion.acceleration}{\mathbf{a}} Acceleration

Constant acceleration

One integration gives the velocity

v(t)=v0+a t\explain{velocity-vector}{\mathbf{v}}(\explain{motion.time}{t}) = \explain{velocity-vector.sub.motion.initial}{\mathbf{v}_0} + \explain{motion.acceleration}{\mathbf{a}}\,\explain{motion.time}{t}
v0\explain{velocity-vector.sub.motion.initial}{\mathbf{v}_0} Velocity vector evaluated at t = 00\explain{motion.initial}{{}_0} Initial value

A second integration gives the position

r(t)=r0+v0 t+12a t2\explain{motion.position}{\mathbf{r}}(\explain{motion.time}{t}) = \explain{motion.position.sub.motion.initial}{\mathbf{r}_0} + \explain{velocity-vector.sub.motion.initial}{\mathbf{v}_0}\,\explain{motion.time}{t} + \tfrac{1}{2}\explain{motion.acceleration}{\mathbf{a}}\,\explain{motion.time}{t}^{2}
  • Horizontally, gravity adds nothing: the speed stays constant
  • Vertically, the speed falls to zero at the top, then turns negative
r0\explain{motion.position.sub.motion.initial}{\mathbf{r}_0} Position evaluated at t = 0

Check

Describe a point in both systems (1/2)

Knowledge check 1.1.1 Position and coordinates

Describe a point in both systems (2/2)

Knowledge check 1.1.1 Position and coordinates

Velocity over time

On a line, a velocity is a signed number

  • Its absolute value is the speed
  • Its sign is the direction of motion
  • Time starts at zero and only increases

A constant acceleration adds the same each second

v(t)=v0+at\explain{motion.velocity}{v(t)} = \explain{motion.launch-speed}{v_0} + \explain{motion.acceleration}{a} \explain{motion.time}{t}
  • The equation is exact: the Acceleration is the rate of change of the velocity
v(t)=v0+a t\explain{velocity-vector}{\mathbf{v}}(\explain{motion.time}{t}) = \explain{velocity-vector.sub.motion.initial}{\mathbf{v}_0} + \explain{motion.acceleration}{\mathbf{a}}\,\explain{motion.time}{t}
v(t)\explain{motion.velocity}{v(t)} Velocityv0\explain{motion.launch-speed}{v_0} Launch speed

Two examples

A car on a ramp gains 8 m/s8\ \text{m/s} in 4 s4\ \text{s}

v(4)=5 m/s+2 m/s2×4 s=13 m/s\begin{aligned} \explain{motion.velocity}{v(4)} &= 5\ \text{m/s} + 2\ \text{m/s}^2 \times 4\ \text{s}\\ &= 13\ \text{m/s} \end{aligned}

Braking takes 2 m/s2\ \text{m/s} off every second

v(3)=8 m/s+(−2 m/s2)×3 s=2 m/s\begin{aligned} \explain{motion.velocity}{v(3)} &= 8\ \text{m/s} + \left(-2\ \text{m/s}^2\right) \times 3\ \text{s}\\ &= 2\ \text{m/s} \end{aligned}
  • An acceleration against the velocity lowers the speed

The two examples side by side

Table 1.2.1The two worked examples at a glance. Each scenario's launch speed, acceleration and time, and the velocity they give.
ScenarioLaunch speed (m/s)\text{(m/s)}Acceleration (m/s2)\text{(m/s}^2\text{)}Time (s)\text{(s)}Velocity (m/s)\text{(m/s)}
Entering a highway52413
Braking to a stop8-232

Check

Predict a velocity

Knowledge check 1.2.1 Velocity under constant acceleration

What you can now do

  • Given a point in the plane, convert between Cartesian and polar coordinates, and identify velocity and acceleration as the first and second time derivatives of position.
  • Given an initial velocity and a constant acceleration, compute the velocity at a later time.
Notation used on this page (13)
φ\varphiPolar angle

The angle from the positive horizontal axis to the line joining the origin to the point, measured counterclockwise.

Units: degrees

ρ\rhoPolar radius

The straight-line distance from the origin to the point, never negative.

Units: meters

v\mathbf{v}Velocity vector

The rate of change of position with time, carrying both components at once so the horizontal and vertical motions stay separate.

Units: meters per second

xxHorizontal coordinate

The signed distance from the origin along the horizontal axis, measured positive to the right.

Units: meters

yyVertical coordinate

The signed distance from the origin along the vertical axis, measured positive upward.

Units: meters

a\mathbf{a}Acceleration

The rate at which velocity changes with time. In this course it is held constant over a scenario, so it is the same vector at every instant.

a=d vdt\explain{motion.acceleration}{\mathbf{a}} = \dfrac{\mathrm{d}\,\explain{motion.velocity}{\mathbf{v}}}{\mathrm{d}\explain{motion.time}{t}}

Units: meters per second squared

□0\square_0Initial value

The value of a quantity at the start of the scenario, the instant when time is zero.

□0=□ (t=0)\explain{motion.initial}{\square}_0 = \explain{motion.initial}{\square}\,(\explain{motion.time}{t} = 0)
θ\thetaLaunch angle

The angle between a projectile's initial velocity and the horizontal ground at launch.

Units: degrees above the horizontal

v0v_0Launch speed

The object's speed at the start of the scenario being analyzed — its initial velocity in a straight-line problem, or its launch speed the instant a projectile leaves the ground.

Units: meters per second

r\mathbf{r}Position

The object's location at elapsed time t, taken as a vector from a fixed origin so a two-dimensional motion keeps its horizontal and vertical parts separate.

r=(x, y)\explain{motion.position}{\mathbf{r}} = (\explain{coordinate-x}{x},\ \explain{coordinate-y}{y})

Units: meters

ttTime

Elapsed time since the object was launched or released, measured in seconds.

Units: seconds after launch

□˙\dot{\square}Time derivative

The rate of change of a quantity with time, written as a dot over the quantity's letter.

Units: per second

v(t)v(t)Velocity

The rate at which position changes with time. It is a vector; in a straight-line problem only its size and sign matter, and that is what the scalar v(t) tracks.

v=d rdt ;v(t)=v0+a t\explain{motion.velocity}{\mathbf{v}} = \dfrac{\mathrm{d}\,\explain{motion.position}{\mathbf{r}}}{\mathrm{d}\explain{motion.time}{t}}\,;\quad \explain{motion.velocity}{v(t)} = \explain{motion.launch-speed}{v_0} + \explain{motion.velocity.constant-acceleration}{a}\,\explain{motion.time}{t}
Symbols
aaconstant acceleration(meters per second squared)

Units: meters per second