Skip to content

Explico Playground

Five chapters and a lesson taught as slides, in two parts, on motion in the plane, projectile motion and orbits. The course demonstrates the reader-facing features of explico, including explained symbols, interactive figures, cited sources, numbered equations, dependency diagrams, knowledge checks, and slides.

2 parts6 chapters4 slide decks1.7–2.3 hours of study

  • Chapter
  • Slides
  • Slides for a whole part

Motion in the plane

Part 1 · 2 chapters35–45 min

  1. Position and Coordinate Systems20–30 min

    Locate a moving point in the plane in Cartesian and polar coordinates, and read velocity and acceleration off position as time derivatives.

    Slides: Position and Coordinate Systems
  2. Velocity Under Constant Acceleration15 min

    Predict an object's velocity at any later time from its initial velocity and a constant acceleration.

    Slides: Velocity Under Constant Acceleration

Projectile motion

Part 2 · 4 chapters65–90 min

  1. Projectile Range20–25 min

    Derive and compute the range of a projectile launched over level ground.

    Slides: Projectile Range
  2. Range Symmetry5–10 min

    Explain why complementary launch angles give the same range over level ground.

  3. The Optimal Launch Angle25–35 min

    Show why 45 degrees maximizes a projectile's range for a fixed launch speed, and what that means for other angles.

    Slides: The Optimal Launch Angle
  4. Newton's Cannonball15–20 min

    Fire a cannonball horizontally ever faster until it falls around the Earth, and find the speed and the period of a low orbit.

Explained symbols

Every symbol in the text and in the equations links to its definition. Point at a symbol, such as the Launch angle θ\explain{motion.launch-angle}{\theta}, to open its explanation. Click the symbol to keep the explanation open. This also works for a symbol inside the formula of another explanation.

Interactive figures

Move a slider to change the launch speed or the launch angle. The trajectory, the range, and the numbers in the rendered equation change at the same time.

Sources, numbers, and checks

Claims link to their sources. Equations, tables, and figures are numbered, and a reference to one of them works across chapters: point at Table 2.1.1 to see the table. Each chapter ends with a knowledge check.

This is a small demonstration course for the explico engine, not a complete physics course.

Notation used on this page (1)
θ\thetaLaunch angle

The angle between a projectile's initial velocity and the horizontal ground at launch.

Units: degrees above the horizontal

Curriculum map

The ordered lesson path is generated from the track and lesson records; the atomic graph below is generated from competency records. Sidebar position does not define prerequisites — directed prerequisites, requires, and teaches references do.

Motion playground

A six-lesson path from position and coordinate systems to projectile range, its angle symmetry, the angle that maximizes it, and the speed at which a projectile falls around the Earth.

Audience: Anyone who has seen basic algebra and wants to see explico's UI on real content.

Entry assumptions:
  • Comfortable with algebraic substitution and basic trigonometry (sin, cos, arctan of an angle).
  1. Lesson 1

    Position and Coordinate Systems

    motion.position-and-coordinates

    Locate a moving point in the plane in Cartesian and polar coordinates, and read velocity and acceleration off position as time derivatives.

    Requires
    Track entry assumptions only
    Teaches
    motion.describe-position
    Evidence
    motion-describe-position-check
  2. Lesson 2

    Velocity Under Constant Acceleration

    motion.constant-acceleration

    Predict an object's velocity at any later time from its initial velocity and a constant acceleration.

    Requires
    Track entry assumptions only
    Teaches
    motion.predict-velocity
    Evidence
    motion-predict-velocity-check
  3. Lesson 3

    Projectile Range

    projectiles.projectile-range

    Derive and compute the range of a projectile launched over level ground.

    Requires
    motion.predict-velocity
    Teaches
    motion.compute-range
    Evidence
    motion-compute-range-check
  4. Lesson 4

    Range Symmetry

    projectiles.range-symmetry

    Explain why complementary launch angles give the same range over level ground.

    Requires
    motion.predict-velocity
    Teaches
    motion.compute-range
    Evidence
    motion-range-symmetry-check
  5. Lesson 5

    The Optimal Launch Angle

    projectiles.optimal-launch-angle

    Show why 45 degrees maximizes a projectile's range for a fixed launch speed, and what that means for other angles.

    Requires
    motion.compute-range
    Teaches
    motion.optimize-angle
    Evidence
    motion-optimize-angle-check
  6. Lesson 6

    Newton's Cannonball

    projectiles.newtons-cannonball

    Fire a cannonball horizontally ever faster until it falls around the Earth, and find the speed and the period of a low orbit.

    Requires
    motion.compute-range
    Teaches
    motion.explain-orbit
    Evidence
    motion-orbit-speed-checkmotion-moon-gravity-check

Atomic competency catalog

Each competency has an explicit prerequisite list and an evidence policy. The build rejects unknown references, cycles, invalid lesson ordering, and insufficient assessment coverage.

Compute a projectile's horizontal range
Describe position and its derivatives in the plane
Explain an orbit as a projectile that never lands
Identify the range-maximizing launch angle
Predict velocity under constant acceleration
The competency dependency graph: an arrow runs from a prerequisite to the competency that builds on it
  1. Compute a projectile's horizontal range
    motion.compute-range

    Given a launch speed and angle over level ground, compute the horizontal range of a projectile.

    Requires: motion.predict-velocity
  2. Describe position and its derivatives in the plane
    motion.describe-position

    Given a point in the plane, convert between Cartesian and polar coordinates, and identify velocity and acceleration as the first and second time derivatives of position.

    Entry competency: no declared prerequisites.
  3. Explain an orbit as a projectile that never lands
    motion.explain-orbit

    Explain an orbit as a horizontal launch so fast that the ground curves away as fast as the projectile falls, and compute the speed and the period of a low orbit.

    Requires: motion.compute-range
  4. Identify the range-maximizing launch angle
    motion.optimize-angle

    For a fixed launch speed over level ground, identify the launch angle that maximizes range.

    Requires: motion.compute-range
  5. Predict velocity under constant acceleration
    motion.predict-velocity

    Given an initial velocity and a constant acceleration, compute the velocity at a later time.

    Entry competency: no declared prerequisites.

Figures and tables

Every numbered figure, table and diagram, chapter by chapter, named by its short caption. A float without one is listed by its long caption, in grey.

Motion in the plane

1.1 Position and Coordinate Systems

  1. Table 1.1.1Two points in both coordinate systems

1.2 Velocity Under Constant Acceleration

  1. Table 1.2.1The two worked examples at a glance

Projectile motion

2.1 Projectile Range

  1. Figure 2.1.1Projectile trajectory explorer
  2. Table 2.1.1Sampled flight data
  3. Diagram 2.1.1Steps of the range derivation

2.2 Range Symmetry

  1. Figure 2.2.1From an angle to its partner

2.3 The Optimal Launch Angle

  1. Figure 2.3.1Range vs. launch angle explorer
  2. Figure 2.3.2The polynomial is a downward parabola
  3. Table 2.3.1Polynomial values around the vertex
  4. Diagram 2.3.1Inputs to the launch-angle search

Motion in the plane

This part defines two things that every later part of the course uses: a way to state the Position of an object, and a way to predict its later position and Velocity. Velocity and Acceleration are time derivatives of position. So this part defines position first.

  • Part 1 of 2
  • 2 chapters
  • 35–45 min
  • 8 numbered equations
  • 2 knowledge checks
  1. Position and Coordinate Systems

    Locate a moving point in the plane in Cartesian and polar coordinates, and read velocity and acceleration off position as time derivatives.

    20–30 min7 equations1 check

    Slides: Position and Coordinate Systems
  2. Velocity Under Constant Acceleration

    Predict an object's velocity at any later time from its initial velocity and a constant acceleration.

    15 min1 equation1 check

    Slides: Velocity Under Constant Acceleration
Notation used on this page (7)
xxHorizontal coordinate

The signed distance from the origin along the horizontal axis, measured positive to the right.

Units: meters

yyVertical coordinate

The signed distance from the origin along the vertical axis, measured positive upward.

Units: meters

a\mathbf{a}Acceleration

The rate at which velocity changes with time. In this course it is held constant over a scenario, so it is the same vector at every instant.

a=d vdt\explain{motion.acceleration}{\mathbf{a}} = \dfrac{\mathrm{d}\,\explain{motion.velocity}{\mathbf{v}}}{\mathrm{d}\explain{motion.time}{t}}

Units: meters per second squared

v0v_0Launch speed

The object's speed at the start of the scenario being analyzed — its initial velocity in a straight-line problem, or its launch speed the instant a projectile leaves the ground.

Units: meters per second

r\mathbf{r}Position

The object's location at elapsed time t, taken as a vector from a fixed origin so a two-dimensional motion keeps its horizontal and vertical parts separate.

r=(x, y)\explain{motion.position}{\mathbf{r}} = (\explain{coordinate-x}{x},\ \explain{coordinate-y}{y})

Units: meters

ttTime

Elapsed time since the object was launched or released, measured in seconds.

Units: seconds after launch

v(t)v(t)Velocity

The rate at which position changes with time. It is a vector; in a straight-line problem only its size and sign matter, and that is what the scalar v(t) tracks.

v=d rdt ;v(t)=v0+a t\explain{motion.velocity}{\mathbf{v}} = \dfrac{\mathrm{d}\,\explain{motion.position}{\mathbf{r}}}{\mathrm{d}\explain{motion.time}{t}}\,;\quad \explain{motion.velocity}{v(t)} = \explain{motion.launch-speed}{v_0} + \explain{motion.velocity.constant-acceleration}{a}\,\explain{motion.time}{t}
Symbols
aaconstant acceleration(meters per second squared)

Units: meters per second

Position and Coordinate Systems

Every later chapter of this course makes statements about two things: the position of an object, and the change of that position with time. This chapter defines the terms for both. Every quantity is stated in SI units (meters, seconds, kilograms, and joules), so each number has exactly one unit.

The Position of an object is a vector from a fixed origin to the object. In the plane, the position has two coordinates: the Horizontal coordinate and the Vertical coordinate. Each coordinate is a function of Time. So the position at time t\explain{motion.time}{t} is the pair of the two coordinates at time t\explain{motion.time}{t}:

r(t)=(x(t), y(t))\explain{motion.position}{\mathbf{r}}(\explain{motion.time}{t}) = \bigl(\explain{coordinate-x}{x}(\explain{motion.time}{t}),\ \explain{coordinate-y}{y}(\explain{motion.time}{t})\bigr)

The two coordinates in (1.1.1) are separate functions of the same time t\explain{motion.time}{t}. So the motion of a projectile can be analyzed as two one-dimensional motions, one horizontal and one vertical, with one common time [1].

The horizontal and the vertical coordinate are the Cartesian coordinates of a point. Polar coordinates are a second way to state the same point. They give the distance of the point from the origin, which is the Polar radius, and the direction of the point from the origin, which is the Polar angle. The two coordinate systems contain the same information, so each converts into the other.

The Pythagorean theorem gives the polar radius from the two Cartesian coordinates, and the arctangent gives the polar angle:

ρ=x2+y2,φ=arctan⁡ ⁣(yx)\explain{polar-radius}{\rho} = \sqrt{\explain{coordinate-x}{x}^{2} + \explain{coordinate-y}{y}^{2}}, \qquad \explain{polar-angle}{\varphi} = \arctan\!\left(\frac{\explain{coordinate-y}{y}}{\explain{coordinate-x}{x}}\right)

The arctangent in (1.1.2) gives angles between −90∘-90^{\circ} and 90∘90^{\circ} only. These angles cover the right half of the plane. For a point in the left half of the plane, add 180∘180^{\circ} to the result. For example, the points (−1,−1)(-1, -1) and (1,1)(1, 1) have the same ratio y/x\explain{coordinate-y}{y}/\explain{coordinate-x}{x}, but they are on opposite sides of the origin. The conversion from polar to Cartesian coordinates in § 1.1.2.2 has no such restriction.

The polar radius multiplied by the cosine and by the sine of the polar angle gives the two Cartesian coordinates:

x=ρcos⁡(φ),y=ρsin⁡(φ)\explain{coordinate-x}{x} = \explain{polar-radius}{\rho}\cos(\explain{polar-angle}{\varphi}), \qquad \explain{coordinate-y}{y} = \explain{polar-radius}{\rho}\sin(\explain{polar-angle}{\varphi})

A launch velocity is usually stated in polar form: a speed and an angle above the horizontal. The conversion in (1.1.3) applies to every vector in the plane. So it also gives the horizontal and the vertical component of a launch velocity.

The Velocity vector is defined as the time derivative of the position. The derivative of a vector is the vector of the derivatives of its coordinates:

v(t)=drdt=(dxdt, dydt)\explain{velocity-vector}{\mathbf{v}}(\explain{motion.time}{t}) = \frac{d\explain{motion.position}{\mathbf{r}}}{d\explain{motion.time}{t}} = \left(\frac{d\explain{coordinate-x}{x}}{d\explain{motion.time}{t}},\ \frac{d\explain{coordinate-y}{y}}{d\explain{motion.time}{t}}\right)

A dot over a letter is a short way to write the Time derivative: x˙\explain{motion.time-derivative}{\dot{\explain{coordinate-x}{x}}} is the time derivative of the horizontal coordinate. With this notation, (1.1.4) is v(t)=(x˙, y˙)\explain{velocity-vector}{\mathbf{v}}(\explain{motion.time}{t}) = (\explain{motion.time-derivative}{\dot{\explain{coordinate-x}{x}}},\ \explain{motion.time-derivative}{\dot{\explain{coordinate-y}{y}}}).

The Acceleration is defined as the time derivative of the velocity. So the acceleration is the second time derivative of the position:

a(t)=dvdt=d2rdt2\explain{motion.acceleration}{\mathbf{a}}(\explain{motion.time}{t}) = \frac{d\explain{velocity-vector}{\mathbf{v}}}{d\explain{motion.time}{t}} = \frac{d^{2}\explain{motion.position}{\mathbf{r}}}{d\explain{motion.time}{t}^{2}}

If the position is twice differentiable with respect to time, (1.1.4) and (1.1.5) are correct. Neither equation assumes that the acceleration is constant in size or in direction.

Every later scenario in this course adds one assumption: the Acceleration is constant in size and in direction.

A subscript zero marks a quantity’s Initial value. With a constant acceleration, integrating (1.1.5) once with respect to time gives the velocity at time t\explain{motion.time}{t} from the initial velocity:

v(t)=v0+a t\explain{velocity-vector}{\mathbf{v}}(\explain{motion.time}{t}) = \explain{velocity-vector.sub.motion.initial}{\mathbf{v}_0} + \explain{motion.acceleration}{\mathbf{a}}\,\explain{motion.time}{t}

Integrating (1.1.6) once more with respect to time gives the position at time t\explain{motion.time}{t} from the initial position and the initial velocity:

r(t)=r0+v0 t+12a t2\explain{motion.position}{\mathbf{r}}(\explain{motion.time}{t}) = \explain{motion.position.sub.motion.initial}{\mathbf{r}_0} + \explain{velocity-vector.sub.motion.initial}{\mathbf{v}_0}\,\explain{motion.time}{t} + \tfrac{1}{2}\explain{motion.acceleration}{\mathbf{a}}\,\explain{motion.time}{t}^{2}

The later chapters of this course use (1.1.7) more than any other equation. Its horizontal and its vertical coordinate give two independent equations. For a projectile, gravity accelerates only the vertical motion. So the horizontal velocity component is constant. The vertical velocity component decreases, is zero at the highest point, and is negative after the highest point.

Example 1.1.1 Calculation examples between coordinate systems

Link to Example 1.1.1: Calculation examples between coordinate systems

Cartesian to polar

A point is at x=3 m\explain{coordinate-x}{x} = 3\ \text{m} and y=4 m\explain{coordinate-y}{y} = 4\ \text{m}. Substituting these coordinates into (1.1.2) gives its Polar radius:

ρ=(3 m)2+(4 m)2=9 m2+16 m2=5 m\begin{aligned} \explain{polar-radius}{\rho} &= \sqrt{(3\ \text{m})^{2} + (4\ \text{m})^{2}}\\ &= \sqrt{9\ \text{m}^2 + 16\ \text{m}^2}\\ &= 5\ \text{m} \end{aligned}

The point is in the right half of the plane, so its Polar angle is arctan⁡(4/3)≈53.1∘\arctan\left(4/3\right) \approx 53.1^{\circ} above the horizontal (approximately 0.93 rad0.93\ \text{rad}).

Polar to Cartesian

A ball is thrown with a speed of 10 m/s10\ \text{m/s} at 30∘30^{\circ} above the horizontal. Applying (1.1.3) to this launch velocity gives its horizontal and vertical components:

v0=(10 m/scos⁡(30∘), 10 m/ssin⁡(30∘))≈(8.66, 5.00) m/s\begin{aligned} \explain{velocity-vector.sub.motion.initial}{\mathbf{v}_0} &= \left(10\ \text{m/s}\cos\left(30^{\circ}\right),\ 10\ \text{m/s}\sin\left(30^{\circ}\right)\right)\\ &\approx (8.66,\ 5.00)\ \text{m/s} \end{aligned}
Table 1.1.1Two points in both coordinate systems. Points A and B, each with its Cartesian coordinates x and y and its polar coordinates ρ and φ.
PointHorizontal coordinate (meters)x (m)\explain{coordinate-x}{x}\ \text{(m)}Vertical coordinate (meters)y (m)\explain{coordinate-y}{y}\ \text{(m)}Polar radius (meters)ρ (m)\explain{polar-radius}{\rho}\ \text{(m)}Polar angle (degrees)φ (°)\explain{polar-angle}{\varphi}\ \text{(°)}
A34553.1
B8.665.001030.0

Table 1.1.1 states two points in both coordinate systems. Point A is the point of the first example in Example 1.1.1. Point B has the numbers of the second example, as a position in m\text{m} instead of a velocity in m/s\text{m/s}.

Knowledge check 1.1.1 Position and coordinates

Link to Knowledge check 1.1.1: Position and coordinates

  1. Ling et al., University Physics Volume 1 (2016). ch. 3, “Time, Position, and Displacement”. https://openstax.org/details/books/university-physics-volume-1 ↩
Notation used on this page (12)
φ\varphiPolar angle

The angle from the positive horizontal axis to the line joining the origin to the point, measured counterclockwise.

Units: degrees

ρ\rhoPolar radius

The straight-line distance from the origin to the point, never negative.

Units: meters

v\mathbf{v}Velocity vector

The rate of change of position with time, carrying both components at once so the horizontal and vertical motions stay separate.

Units: meters per second

xxHorizontal coordinate

The signed distance from the origin along the horizontal axis, measured positive to the right.

Units: meters

yyVertical coordinate

The signed distance from the origin along the vertical axis, measured positive upward.

Units: meters

a\mathbf{a}Acceleration

The rate at which velocity changes with time. In this course it is held constant over a scenario, so it is the same vector at every instant.

a=d vdt\explain{motion.acceleration}{\mathbf{a}} = \dfrac{\mathrm{d}\,\explain{motion.velocity}{\mathbf{v}}}{\mathrm{d}\explain{motion.time}{t}}

Units: meters per second squared

□0\square_0Initial value

The value of a quantity at the start of the scenario, the instant when time is zero.

□0=□ (t=0)\explain{motion.initial}{\square}_0 = \explain{motion.initial}{\square}\,(\explain{motion.time}{t} = 0)
v0v_0Launch speed

The object's speed at the start of the scenario being analyzed — its initial velocity in a straight-line problem, or its launch speed the instant a projectile leaves the ground.

Units: meters per second

r\mathbf{r}Position

The object's location at elapsed time t, taken as a vector from a fixed origin so a two-dimensional motion keeps its horizontal and vertical parts separate.

r=(x, y)\explain{motion.position}{\mathbf{r}} = (\explain{coordinate-x}{x},\ \explain{coordinate-y}{y})

Units: meters

ttTime

Elapsed time since the object was launched or released, measured in seconds.

Units: seconds after launch

□˙\dot{\square}Time derivative

The rate of change of a quantity with time, written as a dot over the quantity's letter.

Units: per second

v(t)v(t)Velocity

The rate at which position changes with time. It is a vector; in a straight-line problem only its size and sign matter, and that is what the scalar v(t) tracks.

v=d rdt ;v(t)=v0+a t\explain{motion.velocity}{\mathbf{v}} = \dfrac{\mathrm{d}\,\explain{motion.position}{\mathbf{r}}}{\mathrm{d}\explain{motion.time}{t}}\,;\quad \explain{motion.velocity}{v(t)} = \explain{motion.launch-speed}{v_0} + \explain{motion.velocity.constant-acceleration}{a}\,\explain{motion.time}{t}
Symbols
aaconstant acceleration(meters per second squared)

Units: meters per second

Velocity Under Constant Acceleration

The Velocity of an object states its speed and its direction of motion at one instant. In this chapter, the object moves along one straight line. So the velocity is a signed number: its absolute value is the speed, and its sign is the direction. The Acceleration is constant during the scenario. On one axis, the vector equation (1.1.6) gives the velocity at time t\explain{motion.time}{t} as the Launch speed plus the acceleration multiplied by t\explain{motion.time}{t}:

v(t)=v0+at\explain{motion.velocity}{v(t)} = \explain{motion.launch-speed}{v_0} + \explain{motion.acceleration}{a} \explain{motion.time}{t}

(1.2.1) is exact, not an approximation. The acceleration is defined as the rate of change of the velocity. If the acceleration is constant, integrating this definition over time gives (1.2.1) without an error term [1]. The same integration for a vector is in § 1.1.4.1.

Example 1.2.1 Speeding up and braking at a constant acceleration

Link to Example 1.2.1: Speeding up and braking at a constant acceleration

Entering a highway

A car enters a straight on-ramp at a Launch speed of 5 m/s5\ \text{m/s} and has a constant Acceleration of 2 m/s22\ \text{m/s}^2. Substituting these values and a time of 4 s4\ \text{s} into (1.2.1) gives its velocity:

v(4)=5 m/s+2 m/s2×4 s=5 m/s+8 m/s=13 m/s\begin{aligned} \explain{motion.velocity}{v(4)} &= 5\ \text{m/s} + 2\ \text{m/s}^2 \times 4\ \text{s}\\ &= 5\ \text{m/s} + 8\ \text{m/s}\\ &= 13\ \text{m/s} \end{aligned}

Braking to a stop

A cyclist moves at a Launch speed of 8 m/s8\ \text{m/s} and brakes with a constant Acceleration of −2 m/s2-2\ \text{m/s}^2. Substituting these values and a time of 3 s3\ \text{s} into (1.2.1) gives its velocity:

v(3)=8 m/s+(−2 m/s2)×3 s=8 m/s−6 m/s=2 m/s\begin{aligned} \explain{motion.velocity}{v(3)} &= 8\ \text{m/s} + \left(-2\ \text{m/s}^2\right) \times 3\ \text{s}\\ &= 8\ \text{m/s} - 6\ \text{m/s}\\ &= 2\ \text{m/s} \end{aligned}

Each second of braking takes 2 m/s2\ \text{m/s} off the velocity:

TimeVelocity
0 s0\ \text{s}8 m/s8\ \text{m/s}
1 s1\ \text{s}6 m/s6\ \text{m/s}
2 s2\ \text{s}4 m/s4\ \text{m/s}
3 s3\ \text{s}2 m/s2\ \text{m/s}

Point at a symbol, in the text or in an equation, to open its explanation. Click the symbol to keep the explanation open while you read.

Table 1.2.1The two worked examples at a glance. Each scenario's launch speed, acceleration and time, and the velocity they give.
ScenarioLaunch speed (m/s)\text{(m/s)}Acceleration (m/s2)\text{(m/s}^2\text{)}Time (s)\text{(s)}Velocity (m/s)\text{(m/s)}
Entering a highway52413
Braking to a stop8-232

Table 1.2.1 compares the inputs and the results of the two examples in Example 1.2.1. Knowledge check 1.2.1 tests the same calculation.

Knowledge check 1.2.1 Velocity under constant acceleration

Link to Knowledge check 1.2.1: Velocity under constant acceleration

  1. Ling et al., University Physics Volume 1 (2016). ch. 3, “Instantaneous Velocity and Speed”. https://openstax.org/details/books/university-physics-volume-1 ↩
Notation used on this page (7)
xxHorizontal coordinate

The signed distance from the origin along the horizontal axis, measured positive to the right.

Units: meters

yyVertical coordinate

The signed distance from the origin along the vertical axis, measured positive upward.

Units: meters

a\mathbf{a}Acceleration

The rate at which velocity changes with time. In this course it is held constant over a scenario, so it is the same vector at every instant.

a=d vdt\explain{motion.acceleration}{\mathbf{a}} = \dfrac{\mathrm{d}\,\explain{motion.velocity}{\mathbf{v}}}{\mathrm{d}\explain{motion.time}{t}}

Units: meters per second squared

v0v_0Launch speed

The object's speed at the start of the scenario being analyzed — its initial velocity in a straight-line problem, or its launch speed the instant a projectile leaves the ground.

Units: meters per second

r\mathbf{r}Position

The object's location at elapsed time t, taken as a vector from a fixed origin so a two-dimensional motion keeps its horizontal and vertical parts separate.

r=(x, y)\explain{motion.position}{\mathbf{r}} = (\explain{coordinate-x}{x},\ \explain{coordinate-y}{y})

Units: meters

ttTime

Elapsed time since the object was launched or released, measured in seconds.

Units: seconds after launch

v(t)v(t)Velocity

The rate at which position changes with time. It is a vector; in a straight-line problem only its size and sign matter, and that is what the scalar v(t) tracks.

v=d rdt ;v(t)=v0+a t\explain{motion.velocity}{\mathbf{v}} = \dfrac{\mathrm{d}\,\explain{motion.position}{\mathbf{r}}}{\mathrm{d}\explain{motion.time}{t}}\,;\quad \explain{motion.velocity}{v(t)} = \explain{motion.launch-speed}{v_0} + \explain{motion.velocity.constant-acceleration}{a}\,\explain{motion.time}{t}
Symbols
aaconstant acceleration(meters per second squared)

Units: meters per second

Projectile motion

Part 1 gave two results for a point that moves under a constant Acceleration a\explain{motion.acceleration}{\mathbf{a}}: its Velocity and its Position at any later time. Table 1.2.1 applies both to two worked examples. Gravity is the only cause of a projectile’s acceleration, and near the ground gravity is constant [1]. So a projectile over level ground is such a point, and this part needs no new law of motion. It applies both results of Part 1 to the horizontal and the vertical component of the motion, one component at a time.

This part answers three questions about a projectile launched over level ground. The first chapter derives the range of the projectile: the horizontal distance from the launch point to the landing point. The second chapter shows why complementary launch angles give the same range. The third chapter finds the launch angle that gives the largest range. Both comparisons follow from the range formula alone, so they need no new physical assumption. A final lesson, taught as slides, fires a projectile so fast that the ground curves away as fast as it falls.

  • Part 2 of 2
  • 4 chapters
  • 65–90 min
  • 5 numbered equations
  • 5 knowledge checks
  1. Projectile Range

    Derive and compute the range of a projectile launched over level ground.

    20–25 min3 equations1 check

    Slides: Projectile Range
  2. Range Symmetry

    Explain why complementary launch angles give the same range over level ground.

    5–10 min1 check

  3. The Optimal Launch Angle

    Show why 45 degrees maximizes a projectile's range for a fixed launch speed, and what that means for other angles.

    25–35 min2 equations1 check

    Slides: The Optimal Launch Angle
  4. Newton's Cannonball

    Fire a cannonball horizontally ever faster until it falls around the Earth, and find the speed and the period of a low orbit.

    15–20 min2 checks

  1. Ling et al., University Physics Volume 1 (2016). ch. 4, “Projectile Motion”. https://openstax.org/details/books/university-physics-volume-1 ↩
Notation used on this page (7)
xxHorizontal coordinate

The signed distance from the origin along the horizontal axis, measured positive to the right.

Units: meters

yyVertical coordinate

The signed distance from the origin along the vertical axis, measured positive upward.

Units: meters

a\mathbf{a}Acceleration

The rate at which velocity changes with time. In this course it is held constant over a scenario, so it is the same vector at every instant.

a=d vdt\explain{motion.acceleration}{\mathbf{a}} = \dfrac{\mathrm{d}\,\explain{motion.velocity}{\mathbf{v}}}{\mathrm{d}\explain{motion.time}{t}}

Units: meters per second squared

v0v_0Launch speed

The object's speed at the start of the scenario being analyzed — its initial velocity in a straight-line problem, or its launch speed the instant a projectile leaves the ground.

Units: meters per second

r\mathbf{r}Position

The object's location at elapsed time t, taken as a vector from a fixed origin so a two-dimensional motion keeps its horizontal and vertical parts separate.

r=(x, y)\explain{motion.position}{\mathbf{r}} = (\explain{coordinate-x}{x},\ \explain{coordinate-y}{y})

Units: meters

ttTime

Elapsed time since the object was launched or released, measured in seconds.

Units: seconds after launch

v(t)v(t)Velocity

The rate at which position changes with time. It is a vector; in a straight-line problem only its size and sign matter, and that is what the scalar v(t) tracks.

v=d rdt ;v(t)=v0+a t\explain{motion.velocity}{\mathbf{v}} = \dfrac{\mathrm{d}\,\explain{motion.position}{\mathbf{r}}}{\mathrm{d}\explain{motion.time}{t}}\,;\quad \explain{motion.velocity}{v(t)} = \explain{motion.launch-speed}{v_0} + \explain{motion.velocity.constant-acceleration}{a}\,\explain{motion.time}{t}
Symbols
aaconstant acceleration(meters per second squared)

Units: meters per second

Projectile Range

This chapter uses two results of the previous part. (1.2.1) gives the Velocity under a constant acceleration. (1.1.7) gives the position under a constant acceleration.

The launch velocity is stated in polar form: a Launch speed and a Launch angle above the horizontal. (1.1.3) converts the launch velocity into a horizontal component v0cos⁡(θ)\explain{motion.launch-speed}{v_0}\cos(\explain{motion.launch-angle}{\theta}) and a vertical component v0sin⁡(θ)\explain{motion.launch-speed}{v_0}\sin(\explain{motion.launch-angle}{\theta}). The Gravitational acceleration is vertical. So the horizontal velocity component is constant during the flight. The vertical velocity component decreases, is zero at the highest point, and is negative after the highest point. So the Flight angle φ\explain{flight-angle}{\varphi} falls from θ\explain{motion.launch-angle}{\theta} at launch to 0∘0^{\circ} at the highest point and to −θ-\explain{motion.launch-angle}{\theta} at landing. Diagram 2.1.1 shows the steps of the derivation:

Launch conditionsv0, θ\explain{motion.launch-speed}{v_0},\ \explain{motion.launch-angle}{\theta}
Decompose into horizontal and vertical componentsvx, vy\explain{motion.velocity.sub.horizontal-component}{v_x},\ \explain{motion.velocity.sub.vertical-component}{v_y}
Time of flight2v0sin⁡(θ) / g2\explain{motion.launch-speed}{v_0}\sin(\explain{motion.launch-angle}{\theta}) \,/\, \explain{motion.gravity}{g}
RangeR=v02sin⁡(2θ) / g\explain{motion.range}{R} = {\explain{motion.launch-speed}{v_0}}^{2}\sin(2\explain{motion.launch-angle}{\theta}) \,/\, \explain{motion.gravity}{g}
Diagram 2.1.1Steps of the range derivation. From the launch conditions to the range, through the two velocity components and the time of flight.

The time of flight is the time from launch to landing. The vertical position is zero at launch and at landing. Setting the vertical position to zero and solving for the time gives a time of flight of 2v0sin⁡(θ)/g2\explain{motion.launch-speed}{v_0}\sin(\explain{motion.launch-angle}{\theta})/\explain{motion.gravity}{g}. The Range is the horizontal distance from the launch point to the landing point. For a constant horizontal velocity component, the range is that component multiplied by the time of flight. Substituting both expressions gives the range:

R=v0cos⁡(θ)⋅2v0sin⁡(θ)g=v02sin⁡(2θ)gdouble-angle identity\begin{aligned} \explain{motion.range}{R} &= \explain{motion.launch-speed}{v_0}\cos(\explain{motion.launch-angle}{\theta})\cdot\frac{2\explain{motion.launch-speed}{v_0}\sin(\explain{motion.launch-angle}{\theta})}{\explain{motion.gravity}{g}}\\ &= \dfrac{\explain{motion.launch-speed}{v_0}^{2}\sin(2\explain{motion.launch-angle}{\theta})}{\explain{motion.gravity}{g}} \quad\text{double-angle identity} \end{aligned}

Solving (2.1.1) for the Launch speed gives the launch speed that produces a given range. Three symbols of the result are under the square root sign, and each of them still opens its explanation:

v0=R g csc⁡ ⁣(2θ)\explain{motion.launch-speed}{v_0} = \sqrt{\explain{motion.range}{R}\,\explain{motion.gravity}{g}\,\csc\!\left(2\explain{motion.launch-angle}{\theta}\right)}

Equation (2.1.2) uses csc⁡(2θ)=1/sin⁡(2θ)\csc(2\explain{motion.launch-angle}{\theta}) = 1/\sin(2\explain{motion.launch-angle}{\theta}). It is defined only for sin⁡(2θ)>0\sin(2\explain{motion.launch-angle}{\theta}) > 0, i.e., for 0∘<θ<90∘0^{\circ} < \explain{motion.launch-angle}{\theta} < 90^{\circ}.

If the launch point is higher than the landing point, (2.1.1) does not apply. Let Launch height be the height of the launch point above the landing plane. The time of flight is then the positive solution of a quadratic equation for the vertical position [2]. The range is the horizontal velocity component multiplied by this time of flight:

R=v0cos⁡(θ)g[v0sin⁡(θ)+(v0sin⁡(θ))2+2gh]\explain{motion.range}{R} = \dfrac{\explain{motion.launch-speed}{v_0}\cos(\explain{motion.launch-angle}{\theta})}{\explain{motion.gravity}{g}}\left[\explain{motion.launch-speed}{v_0}\sin\left(\explain{motion.launch-angle}{\theta}\right) + \sqrt{\left(\explain{motion.launch-speed}{v_0}\sin\left(\explain{motion.launch-angle}{\theta}\right)\right)^{2} + 2\explain{motion.gravity}{g}\explain{launch-height}{h}}\right]

For Launch height =0= 0, the square root in (2.1.3) equals v0sin⁡(θ)\explain{motion.launch-speed}{v_0}\sin(\explain{motion.launch-angle}{\theta}). So the bracket equals 2v0sin⁡(θ)2\explain{motion.launch-speed}{v_0}\sin(\explain{motion.launch-angle}{\theta}), and (2.1.3) reduces to (2.1.1).

(2.1.3) also shows how this engine sizes delimiters. Three scalable pairs are nested: the parentheses of the squared group are inside the square root, and the square root is inside the outer bracket. The square root is as tall as a fraction, and the outer bracket must be taller than the square root. Stock KaTeX lets a \left … \right pair be slightly shorter than its content. Then all three pairs get the same glyph, and the reader cannot see the nesting. This engine uses a patched KaTeX that makes every pair strictly taller than its content. So each level is visibly larger than the level inside it, and the source contains no manual size command such as \Bigl or \biggl.

The explorer in Figure 2.1.1 evaluates (2.1.1) for a launch speed and a launch angle that you choose. If (2.1.1) is on the screen, a reference to it highlights the equation. If the equation is off the screen, the reference opens a preview of it.

02468101214161820↑ Height (m)0510152025303540Horizontal distance (m) →
Figure 2.1.1Projectile trajectory explorer. The path from launch to landing; the dot marks the landing point.
Controls of Figure 2.1.1

Move either slider, or choose a rendered angle preset, to change the trajectory and the range.

Angle preset
R=v02sin⁡(2θ)g=20.02sin⁡(2×30°)9.81=35.3 m\explain{motion.range}{R} = \dfrac{\explain{motion.launch-speed}{v_0}^2\sin(2\explain{motion.launch-angle}{\theta})}{\explain{motion.gravity}{g}} = \dfrac{ \htmlData{lab-slot=v0}{20.0} ^2\sin(2\times \htmlData{lab-slot=theta}{30} \text{°})}{ \htmlData{lab-slot=g}{9.81} } = \htmlData{lab-slot=range}{35.3} \text{ m}

For a fixed launch speed, a larger launch angle gives a higher trajectory, but not always a larger range. The range is the horizontal velocity component multiplied by the time of flight. A larger launch angle increases the time of flight but decreases the horizontal velocity component.

The next chapter plots the range against the launch angle for one launch speed, in Figure 2.3.1. That plot shows which launch angle gives the largest range.

A reference to Figure 2.1.1 scrolls back to the explorer.

The explorer shows one trajectory at a time. Table 2.1.1 instead lists the state of one flight at eleven values of Time, from launch to landing. The flight has a Launch speed of 45 m/s45\ \text{m/s} and a Launch angle of 55∘55^\circ. Each row gives the Position by its Horizontal coordinate and its Vertical coordinate, the Velocity, and the Acceleration from the constant-acceleration equations of the previous part. Each row also gives the Kinetic energy and the Potential energy per unit Mass:

Table 2.1.1Sampled flight data. Position, velocity, acceleration and specific mechanical energy through one flight, from launch to landing.
Time (seconds after launch)t (s)\explain{motion.time}{t}\ \text{(s)}Horizontal coordinate (meters)x (m)\explain{coordinate-x}{x}\ \text{(m)}Vertical coordinate (meters)y (m)\explain{coordinate-y}{y}\ \text{(m)}Horizontal component of velocity (meters per second)vx (m/s)\explain{motion.velocity.sub.horizontal-component}{v_x}\ \text{(m/s)}Vertical component of velocity (meters per second)vy (m/s)\explain{motion.velocity.sub.vertical-component}{v_y}\ \text{(m/s)}Horizontal acceleration (meters per second squared) / Horizontal coordinate (meters)ax (m/s2)\explain{horizontal-acceleration}{a_{\explain{coordinate-x}{x}}}\ \text{(m/s}^{2}\text{)}Vertical acceleration (meters per second squared) / Vertical coordinate (meters)ay (m/s2)\explain{vertical-acceleration}{a_{\explain{coordinate-y}{y}}}\ \text{(m/s}^{2}\text{)}Velocity (meters per second)∣v∣ (m/s)\lvert\explain{motion.velocity}{\mathbf{v}}\rvert\ \text{(m/s)}Launch angle (degrees above the horizontal)θ (°)\explain{motion.launch-angle}{\theta}\ \text{(°)}Kinetic energy (joules) / Mass (kilograms)KE/m (J/kg)\explain{kinetic-energy}{\mathrm{KE}}/\explain{mass}{m}\ \text{(J/kg)}Potential energy (joules) / Mass (kilograms)PE/m (J/kg)\explain{potential-energy}{\mathrm{PE}}/\explain{mass}{m}\ \text{(J/kg)}
0.000.000.0025.8136.860.00-9.8045.0055.001012.500.00
0.7519.3624.8925.8129.510.00-9.8039.2148.83768.58243.92
1.5038.7244.2725.8122.160.00-9.8034.0240.65578.68433.82
2.2558.0758.1325.8114.810.00-9.8029.7629.85442.80569.70
3.0077.4366.4925.817.460.00-9.8026.8716.12360.94651.56
3.7697.0569.3325.810.010.00-9.8025.810.03333.10679.40
4.50116.1566.6525.81-7.240.00-9.8026.81-15.67359.30653.20
5.25135.5158.4725.81-14.590.00-9.8029.65-29.47439.51572.99
6.00154.8744.7725.81-21.940.00-9.8033.87-40.36573.74438.76
6.75174.2225.5625.81-29.290.00-9.8039.04-48.61762.00250.50
7.52194.170.0025.81-36.860.00-9.8045.00-55.001012.500.00

Eleven columns are enough to make Table 2.1.1 scroll horizontally on most screens. Each row agrees with the results of this chapter:

  • The Gravitational acceleration appears only in the ay\explain{vertical-acceleration}{a_{\explain{coordinate-y}{y}}} column. The ax\explain{horizontal-acceleration}{a_{\explain{coordinate-x}{x}}} column is zero in every row.
  • The vx\explain{motion.velocity.sub.horizontal-component}{v_x} column has the same value in every row.
  • The sum of the last two columns is 1012.50 J/kg1012.50\ \text{J/kg} in every row. This sum is the mechanical energy per unit Mass. The mechanical energy is constant because air resistance is zero.
  • At t=3.76 s\explain{motion.time}{t} = 3.76\ \text{s}, the vy\explain{motion.velocity.sub.vertical-component}{v_y} column is approximately zero. So this row is the highest point of the flight.
  • The last row is the landing. For this launch speed and launch angle, (2.1.1) gives R≈194 m\explain{motion.range}{R} \approx 194\ \text{m}, and the x\explain{coordinate-x}{x} column gives 194.17 m194.17\ \text{m}.

Knowledge check 2.1.1 Projectile range

Link to Knowledge check 2.1.1: Projectile range

  1. Ling et al., University Physics Volume 1 (2016). ch. 4, “Projectile Motion”. https://openstax.org/details/books/university-physics-volume-1 ↩
  2. Urone & Hinrichs, College Physics 2e (2022). ch. 3, “Projectile Motion”, Example 3.5. https://openstax.org/details/books/college-physics-2e ↩
Notation used on this page (19)
φ\varphiFlight angle

The angle of the projectile's velocity above the horizontal at one moment of the flight. It equals the launch angle at launch, is zero at the highest point, and is the negative of the launch angle at landing on level ground.

Units: degrees above the horizontal

axa_xHorizontal acceleration

The acceleration along the horizontal axis. Without air resistance nothing pushes the projectile sideways, so it is zero for the whole flight.

Units: meters per second squared

□x\square_xHorizontal component

The part of a vector quantity along the horizontal axis, positive in the direction of flight.

KE\mathrm{KE}Kinetic energy

The energy of the projectile due to its motion. It equals one half of the mass multiplied by the square of the speed.

Units: joules

hhLaunch height

The height of the launch point above the plane on which the projectile lands. It is zero for level ground.

Units: meters

mmMass

The projectile's mass. The sampled flight data table gives the kinetic and the potential energy per unit mass, so the mass does not appear in any computed value.

Units: kilograms

PE\mathrm{PE}Potential energy

The energy of the projectile due to its height above the launch point in the gravitational field.

Units: joules

aya_yVertical acceleration

The acceleration along the vertical axis. Gravity alone acts on the projectile, so it equals the negative of the gravitational acceleration for the whole flight.

Units: meters per second squared

□y\square_yVertical component

The part of a vector quantity along the vertical axis, positive upward.

xxHorizontal coordinate

The signed distance from the origin along the horizontal axis, measured positive to the right.

Units: meters

yyVertical coordinate

The signed distance from the origin along the vertical axis, measured positive upward.

Units: meters

a\mathbf{a}Acceleration

The rate at which velocity changes with time. In this course it is held constant over a scenario, so it is the same vector at every instant.

a=d vdt\explain{motion.acceleration}{\mathbf{a}} = \dfrac{\mathrm{d}\,\explain{motion.velocity}{\mathbf{v}}}{\mathrm{d}\explain{motion.time}{t}}

Units: meters per second squared

ggGravitational acceleration

The magnitude of gravitational acceleration, treated as constant near the ground.

Units: meters per second squared

θ\thetaLaunch angle

The angle between a projectile's initial velocity and the horizontal ground at launch.

Units: degrees above the horizontal

v0v_0Launch speed

The object's speed at the start of the scenario being analyzed — its initial velocity in a straight-line problem, or its launch speed the instant a projectile leaves the ground.

Units: meters per second

r\mathbf{r}Position

The object's location at elapsed time t, taken as a vector from a fixed origin so a two-dimensional motion keeps its horizontal and vertical parts separate.

r=(x, y)\explain{motion.position}{\mathbf{r}} = (\explain{coordinate-x}{x},\ \explain{coordinate-y}{y})

Units: meters

RRRange

Total horizontal distance a projectile covers before it returns to its launch height.

R=v02sin⁡(2θ)g\explain{motion.range}{R} = \dfrac{\explain{motion.launch-speed}{v_0}^{2}\sin(2\explain{motion.launch-angle}{\theta})}{\explain{motion.gravity}{g}}

Units: meters

ttTime

Elapsed time since the object was launched or released, measured in seconds.

Units: seconds after launch

v(t)v(t)Velocity

The rate at which position changes with time. It is a vector; in a straight-line problem only its size and sign matter, and that is what the scalar v(t) tracks.

v=d rdt ;v(t)=v0+a t\explain{motion.velocity}{\mathbf{v}} = \dfrac{\mathrm{d}\,\explain{motion.position}{\mathbf{r}}}{\mathrm{d}\explain{motion.time}{t}}\,;\quad \explain{motion.velocity}{v(t)} = \explain{motion.launch-speed}{v_0} + \explain{motion.velocity.constant-acceleration}{a}\,\explain{motion.time}{t}
Symbols
aaconstant acceleration(meters per second squared)

Units: meters per second

Range Symmetry

The range formula in (2.1.1) predicts a symmetry that is useful when comparing trajectories. With the same Launch speed, a low launch and a high launch can have the same Range.

Let the Launch angle be θ\explain{motion.launch-angle}{\theta}. Its complementary angle is 90∘−θ90^{\circ} - \explain{motion.launch-angle}{\theta}, because the two angles add to 90∘90^{\circ}. Doubling the complementary angle and using the supplementary-angle identity gives the same sine factor as the original angle:

sin⁡ ⁣(2(90∘−θ))=sin⁡ ⁣(180∘−2θ)=sin⁡(2θ)\begin{aligned} \sin\!\left(2\left(90^{\circ} - \explain{motion.launch-angle}{\theta}\right)\right) &= \sin\!\left(180^{\circ} - 2\explain{motion.launch-angle}{\theta}\right)\\ &= \sin(2\explain{motion.launch-angle}{\theta}) \end{aligned}

The other factors in the range formula do not change. Therefore complementary launch angles give the same range over level ground when air resistance is ignored.

For a launch at 30∘30^{\circ}, the complementary angle is 90∘−30∘=60∘90^{\circ} - 30^{\circ} = 60^{\circ}. Their doubled angles are 60∘60^{\circ} and 120∘120^{\circ}, which have the same sine. Therefore launches at 30∘30^{\circ} and 60∘60^{\circ} travel the same horizontal distance when their launch speeds are equal.

Equal range does not mean equal motion. The steeper launch rises higher and stays in the air longer. The shallower launch has a larger horizontal velocity component, which compensates for its shorter time in the air.

A short script computes the range of each launch angle and of its complement, for the same launch speed:

range_pairs.py
from math import radians, sin
def launch_range(v0, angle_deg, g=9.81):
return v0**2 * sin(radians(2 * angle_deg)) / g
for angle in (15, 30, 45):
print(angle, 90 - angle, launch_range(31.6, angle))

Its output, one row per pair, is in the table of range pairs. A common slip is to pair 30∘30^{\circ} with 150∘150^{\circ} 60∘60^{\circ}: the two angles add up to 90∘90^{\circ}, not to 180∘180^{\circ}. Figure 2.2.1 sums up why each pair shares its range.

Two launches at complementary angles, landing at the same point

Launch angle and its complement
Doubled: two supplementary angles
One sine, so one range
The steps from a launch angle to the range it shares with its complement.
Figure 2.2.1From an angle to its partner. Each launch angle and its complement double to supplementary angles, which share one sine and so one range.

Before the checks, make sure of both steps:

  • the range formula over level ground
  • the supplementary-angle identity for the sine

Knowledge check 2.2.1 Complementary launch angles

Link to Knowledge check 2.2.1: Complementary launch angles

Notation used on this page (5)
ggGravitational acceleration

The magnitude of gravitational acceleration, treated as constant near the ground.

Units: meters per second squared

θ\thetaLaunch angle

The angle between a projectile's initial velocity and the horizontal ground at launch.

Units: degrees above the horizontal

v0v_0Launch speed

The object's speed at the start of the scenario being analyzed — its initial velocity in a straight-line problem, or its launch speed the instant a projectile leaves the ground.

Units: meters per second

RRRange

Total horizontal distance a projectile covers before it returns to its launch height.

R=v02sin⁡(2θ)g\explain{motion.range}{R} = \dfrac{\explain{motion.launch-speed}{v_0}^{2}\sin(2\explain{motion.launch-angle}{\theta})}{\explain{motion.gravity}{g}}

Units: meters

ttTime

Elapsed time since the object was launched or released, measured in seconds.

Units: seconds after launch

The Optimal Launch Angle

By (2.1.1), the Range depends on the Launch angle only through sin⁡(2θ)\sin(2\explain{motion.launch-angle}{\theta}). The previous chapter derives that equation. For 0∘≤θ≤90∘0^{\circ} \le \explain{motion.launch-angle}{\theta} \le 90^{\circ}, the argument 2θ2\explain{motion.launch-angle}{\theta} is between 0∘0^{\circ} and 180∘180^{\circ}. On this interval, the sine has its maximum value, 11, at 90∘90^{\circ}. So for a fixed launch speed, the range is largest at 2θ=90∘2\explain{motion.launch-angle}{\theta} = 90^{\circ}, i.e., at θ=45∘\explain{motion.launch-angle}{\theta} = 45^{\circ}. The explorer in Figure 2.1.1 shows this result. Diagram 2.3.1 shows the inputs to the search for this launch angle.

This section finds the same launch angle as the maximum of a polynomial. For 0∘≤θ≤90∘0^{\circ} \le \explain{motion.launch-angle}{\theta} \le 90^{\circ}, the product sin⁡(θ)cos⁡(θ)\sin(\explain{motion.launch-angle}{\theta})\cos(\explain{motion.launch-angle}{\theta}) is not negative. So the range is largest where the square of this product is largest. Let u\explain{x}{u} be the Squared sine of the launch angle: u=sin⁡2(θ)\explain{x}{u} = \sin^{2}(\explain{motion.launch-angle}{\theta}). Rewriting the square of the product in terms of u\explain{x}{u} gives a second-order polynomial:

sin⁡2(θ) cos⁡2(θ)=sin⁡2(θ)(1−sin⁡2(θ))Pythagorean identity=u(1−u)definition of u=u−u2\begin{aligned} \sin^{2}(\explain{motion.launch-angle}{\theta})\,\cos^{2}(\explain{motion.launch-angle}{\theta}) &= \sin^{2}(\explain{motion.launch-angle}{\theta})\left(1 - \sin^{2}\left(\explain{motion.launch-angle}{\theta}\right)\right) \quad\text{Pythagorean identity}\\ &= \explain{x}{u}\left(1 - \explain{x}{u}\right) \quad\text{definition of }\explain{x}{u}\\ &= \explain{x}{u} - \explain{x}{u}^{2} \end{aligned}

The graph of this polynomial is a downward parabola with roots at u=0\explain{x}{u} = 0 and u=1\explain{x}{u} = 1. A downward parabola has its maximum halfway between its roots, so the polynomial is largest at u=12\explain{x}{u} = \tfrac{1}{2}. Converting this value of u\explain{x}{u} back to a launch angle gives the Optimal launch angle:

θ∗=arcsin⁡(u)definition of u, with sin⁡(θ)≥0=arcsin⁡(12)vertex at u=12=45∘\begin{aligned} \explain{theta-star}{\theta^{*}} &= \arcsin\left(\sqrt{\explain{x}{u}}\right) \qquad\text{definition of }\explain{x}{u}\text{, with }\sin(\explain{motion.launch-angle}{\theta}) \ge 0\\ &= \arcsin\left(\tfrac{1}{\sqrt{2}}\right) \qquad\text{vertex at }\explain{x}{u} = \tfrac{1}{2}\\ &= 45^{\circ} \end{aligned}

Setting the derivative of the polynomial to zero gives the same vertex . But the symmetry of the parabola gives the vertex without a derivative. In (2.1.1), the launch speed appears only in the factor v02\explain{motion.launch-speed}{v_0}^{2}, which does not depend on the launch angle. A positive constant factor does not change the position of the maximum. So the Optimal launch angle is 45∘45^{\circ} for every launch speed. checks the vertex numerically and graphically.

Complementary launch angles give equal ranges

Section titled “Complementary launch angles give equal ranges”

Two launch angles are complementary if their sum is 90∘90^{\circ}. The Complementary launch angle of θ\explain{motion.launch-angle}{\theta} is θ′=90∘−θ\explain{theta-complement}{\theta'} = 90^{\circ} - \explain{motion.launch-angle}{\theta}. On this page the prime marks this angle and does not mean a derivative. For complementary launch angles, sin⁡(2θ′)=sin⁡(180∘−2θ)=sin⁡(2θ)\sin\left(2\explain{theta-complement}{\theta'}\right) = \sin\left(180^{\circ} - 2\explain{motion.launch-angle}{\theta}\right) = \sin(2\explain{motion.launch-angle}{\theta}). So two complementary launch angles give equal ranges. For example, the range at a launch angle of 30∘30^{\circ} equals the range at a launch angle of 60∘60^{\circ}. The Optimal launch angle is the only launch angle that is its own complement.

Diagram 2.3.1 Inputs to the launch-angle search
Fixed launch speedv0\explain{motion.launch-speed}{v_0}
Try each launch angle
Compare the resulting ranges
Diagram 2.3.1Inputs to the launch-angle search. The launch speed stays fixed while each launch angle is tried in turn, and the ranges they give are compared.
0510152025303540↑ Range (m)0102030405060708090Launch angle (degrees) →
Figure 2.3.1Range vs. launch angle explorer. The range at every launch angle for one launch speed; the dashed line marks 45°, where the range is largest.
Controls of Figure 2.3.1

Move the launch speed slider to redraw the curve, and the launch angle slider to move the dot along it.

The curve is symmetric about 45∘45^{\circ}. A launch angle of 20∘20^{\circ} and a launch angle of 70∘70^{\circ} give the same range. The trajectory at 20∘20^{\circ} is lower and has a shorter time of flight than the trajectory at 70∘70^{\circ}.

Checking the polynomial vertex: its values on both sides of the vertex, and its downward-parabola shape
Memo a: Checking the polynomial vertex

Evaluating the polynomial at the vertex, u=12\explain{x}{u} = \tfrac{1}{2}, gives its maximum value:

u(1−u)∣u=1/2=14\explain{x}{u}(1-\explain{x}{u})\big|_{\explain{x}{u}=1/2}=\tfrac{1}{4}

Two values of u\explain{x}{u} at equal distances from the vertex give equal values of the polynomial, and both values are smaller than the maximum.

Table 2.3.1Polynomial values around the vertex. The polynomial at five inputs placed symmetrically about the vertex, 1/2: inputs equally far from it give equal values.
Squared sine of the launch angleValue of the polynomial
0000
14\tfrac{1}{4}316\tfrac{3}{16}
12\tfrac{1}{2}14\tfrac{1}{4}
34\tfrac{3}{4}316\tfrac{3}{16}
1100
00.250.50.75100.10.20.30.4
Figure 2.3.2The polynomial is a downward parabola. From 0 at input 0 it rises to its maximum, 0.25, at input 0.5, and falls symmetrically back to 0 at input 1.

(2.3.4), Table 2.3.1, and Figure 2.3.2 are inside the memo. A reference to each of them also works while the memo is closed.

Knowledge check 2.3.1 Optimal launch angle

Link to Knowledge check 2.3.1: Optimal launch angle

Notation used on this page (8)
  • On this page, □′\square' is not an operator. The prime marks the complementary launch angle, not a derivative.
θ′\theta'Complementary launch angle

The launch angle whose sum with a given launch angle is 90 degrees.

Units: degrees above the horizontal

θ∗\theta^{*}Optimal launch angle

The launch angle that maximizes range for a given fixed launch speed, over level ground.

Units: degrees above the horizontal

uuSquared sine of the launch angle

The squared sine of the launch angle, used as the variable in the range polynomial.

u=sin⁡2(θ)\explain{x}{u} = \sin^{2}(\theta)

Units: dimensionless

ggGravitational acceleration

The magnitude of gravitational acceleration, treated as constant near the ground.

Units: meters per second squared

θ\thetaLaunch angle

The angle between a projectile's initial velocity and the horizontal ground at launch.

Units: degrees above the horizontal

v0v_0Launch speed

The object's speed at the start of the scenario being analyzed — its initial velocity in a straight-line problem, or its launch speed the instant a projectile leaves the ground.

Units: meters per second

RRRange

Total horizontal distance a projectile covers before it returns to its launch height.

R=v02sin⁡(2θ)g\explain{motion.range}{R} = \dfrac{\explain{motion.launch-speed}{v_0}^{2}\sin(2\explain{motion.launch-angle}{\theta})}{\explain{motion.gravity}{g}}

Units: meters

ttTime

Elapsed time since the object was launched or released, measured in seconds.

Units: seconds after launch

Newton's Cannonball

16 slides

Newton's Cannonball

Explico Playground — Motion

Course Author

Content unchanged since version 1.0.0

A cannon above the air

Speed alone decides: land, orbit or escape

Newton's cannonball. A cannon on a mountain 1000 km high fires a ball horizontally; the faint paths are slower shots.
Controls of Figure

Move the launch speed slider to fire the ball faster or slower.

The speed of a low orbit

The ground curves away as fast as the ball falls

  • In a time t\explain{motion.time}{t} the ball falls 12 g t2\tfrac{1}{2}\,\explain{motion.gravity}{g}\,\explain{motion.time}{t}^{2}
  • In that time the ground drops (v1 t)2/(2RE)(\explain{circular-speed}{v_{1}}\,\explain{motion.time}{t})^{2}/(2\explain{earth-radius}{R_{E}}) below the horizontal
v1=g RE\explain{circular-speed}{v_{1}} = \sqrt{\explain{motion.gravity}{g}\,\explain{earth-radius}{R_{E}}}
t\explain{motion.time}{t} Timeg\explain{motion.gravity}{g} Gravitational accelerationv1\explain{circular-speed}{v_{1}} Circular orbital speedRE\explain{earth-radius}{R_{E}} Earth's radius

A ground-skimming orbit needs 7.9 km/s7.9\ \text{km/s}

v1=9.81 m/s2×6.371×106 m≈7.9×103 m/s\explain{circular-speed}{v_{1}} = \sqrt{9.81\ \text{m/s}^2 \times 6.371 \times 10^{6}\ \text{m}} \approx 7.9 \times 10^{3}\ \text{m/s}
  • That is about 28 000 km/h28\,000\ \text{km/h}
  • From the lab’s mountain, 1000 km1000\ \text{km} high, less: 7.35 km/s7.35\ \text{km/s}

One lap of a low orbit takes 84 min84\ \text{min}

T=2π REv1≈4.0×107 m7.9×103 m/s≈5.1×103 s\explain{orbital-period}{T} = \frac{2\pi\,\explain{earth-radius}{R_{E}}}{\explain{circular-speed}{v_{1}}} \approx \frac{4.0 \times 10^{7}\ \text{m}}{7.9 \times 10^{3}\ \text{m/s}} \approx 5.1 \times 10^{3}\ \text{s}
  • The space station, about 400 km400\ \text{km} up, takes about 92 min92\ \text{min}
T\explain{orbital-period}{T} Orbital period

Faster than a circle

At 2\sqrt{2} times the circle’s speed, it escapes

v2=2 v1≈11.2 km/s\explain{escape-speed}{v_{2}} = \sqrt{2}\,\explain{circular-speed}{v_{1}} \approx 11.2\ \text{km/s}
  • Between v1\explain{circular-speed}{v_{1}} and v2\explain{escape-speed}{v_{2}}, the ball orbits on an ellipse
  • At v2\explain{escape-speed}{v_{2}} or faster, it never comes back
v2\explain{escape-speed}{v_{2}} Escape speed

The Moon is a cannonball too

The Moon falls toward the Earth all the time

  • At 60 RE60\,\explain{earth-radius}{R_{E}} from the center, the Moon moves sideways at about 1 km/s1\ \text{km/s}
  • Like the cannonball, it falls toward the Earth and never lands
a=4π2 rT2≈2.7×10−3 m/s2≈g602\explain{motion.acceleration}{a} = \frac{4\pi^{2}\,\explain{orbit-radius}{r}}{\explain{orbital-period}{T}^{2}} \approx 2.7 \times 10^{-3}\ \text{m/s}^2 \approx \frac{\explain{motion.gravity}{g}}{60^{2}}
a\explain{motion.acceleration}{\mathbf{a}} Accelerationr\explain{orbit-radius}{r} Orbit radius

Check

Compute the speed of a low orbit

Knowledge check 2.4.1 The speed of a low orbit

Weigh gravity at the Moon’s distance

Knowledge check 2.4.2 Gravity at the Moon's distance

What you can now do

  • Explain an orbit as a horizontal launch so fast that the ground curves away as fast as the projectile falls, and compute the speed and the period of a low orbit.

References

  1. Newton, A Treatise of the System of the World (1728). ↩
  2. Ling et al., University Physics Volume 1 (2016). ch. 13, “Satellite Orbits and Energy”. https://openstax.org/details/books/university-physics-volume-1 ↩
  3. Ling et al., University Physics Volume 1 (2016). ch. 13, “Gravitational Potential Energy and Total Energy”. https://openstax.org/details/books/university-physics-volume-1 ↩
Notation used on this page (13)
v1v_{1}Circular orbital speed

The horizontal launch speed at which a projectile falls around the Earth on a circle and never reaches the ground.

Units: meters per second

RER_{E}Earth's radius

The distance from the Earth's center to its surface.

Units: meters

v2v_{2}Escape speed

The launch speed from which a projectile leaves the Earth and never comes back.

Units: meters per second

rrOrbit radius

The distance from the Earth's center to a body that orbits it on a circle.

Units: meters

TTOrbital period

The time a body on a closed orbit takes to come back to where it started.

Units: seconds

xxHorizontal coordinate

The signed distance from the origin along the horizontal axis, measured positive to the right.

Units: meters

yyVertical coordinate

The signed distance from the origin along the vertical axis, measured positive upward.

Units: meters

a\mathbf{a}Acceleration

The rate at which velocity changes with time. In this course it is held constant over a scenario, so it is the same vector at every instant.

a=d vdt\explain{motion.acceleration}{\mathbf{a}} = \dfrac{\mathrm{d}\,\explain{motion.velocity}{\mathbf{v}}}{\mathrm{d}\explain{motion.time}{t}}

Units: meters per second squared

ggGravitational acceleration

The magnitude of gravitational acceleration, treated as constant near the ground.

Units: meters per second squared

v0v_0Launch speed

The object's speed at the start of the scenario being analyzed — its initial velocity in a straight-line problem, or its launch speed the instant a projectile leaves the ground.

Units: meters per second

r\mathbf{r}Position

The object's location at elapsed time t, taken as a vector from a fixed origin so a two-dimensional motion keeps its horizontal and vertical parts separate.

r=(x, y)\explain{motion.position}{\mathbf{r}} = (\explain{coordinate-x}{x},\ \explain{coordinate-y}{y})

Units: meters

ttTime

Elapsed time since the object was launched or released, measured in seconds.

Units: seconds after launch

v(t)v(t)Velocity

The rate at which position changes with time. It is a vector; in a straight-line problem only its size and sign matter, and that is what the scalar v(t) tracks.

v=d rdt ;v(t)=v0+a t\explain{motion.velocity}{\mathbf{v}} = \dfrac{\mathrm{d}\,\explain{motion.position}{\mathbf{r}}}{\mathrm{d}\explain{motion.time}{t}}\,;\quad \explain{motion.velocity}{v(t)} = \explain{motion.launch-speed}{v_0} + \explain{motion.velocity.constant-acceleration}{a}\,\explain{motion.time}{t}
Symbols
aaconstant acceleration(meters per second squared)

Units: meters per second

Notation glossary

These definitions are generated from the shared notation collection. Every entry is still draft until its wording, convention, source locator, and curriculum owner receive human review.

On one page only

Symbols a single chapter defines for itself, or a formula names for its own use. The letter may mean something else elsewhere; the page is where its card is.

a\mathbf{a}
motion.acceleration

The rate at which velocity changes with time. In this course it is held constant over a scenario, so it is the same vector at every instant.

a=d vdt\explain{motion.acceleration}{\mathbf{a}} = \dfrac{\mathrm{d}\,\explain{motion.velocity}{\mathbf{v}}}{\mathrm{d}\explain{motion.time}{t}}
Symbols
v(t)v(t)Velocity(meters per second)
ttTime(seconds after launch)

Acceleration is the second time derivative of Position: velocity is the rate of change of position, and acceleration is the rate of change of velocity. The straight-line chapters assume a constant acceleration for the whole scenario. This assumption makes (1.2.1) exact, not an approximation. A positive acceleration component means that the velocity component in that direction increases. A negative acceleration component means that it decreases.

gg

The magnitude of gravitational acceleration, treated as constant near the ground.

Near the ground the acceleration of a falling body is constant in size and points down; the course treats it as the constant g\explain{motion.gravity}{g} on every page, so it is one shared card rather than a definition each projectile lesson repeats.

Introduced by: Promoted from projectiles.projectile-range's page-local entry.

Used directly in: Newton's Cannonball, Projectile Range

Source records:
  • openstax-university-physics-1 — ch. 4, "Projectile Motion"
xx

The signed distance from the origin along the horizontal axis, measured positive to the right.

One of the two coordinates of the Position in the plane, with the vertical coordinate. A projectile’s horizontal coordinate grows at a constant rate when air resistance is neglected, since nothing pushes it sideways.

□0\square_0
motion.initial

The value of a quantity at the start of the scenario, the instant when time is zero.

□0=□ (t=0)\explain{motion.initial}{\square}_0 = \explain{motion.initial}{\square}\,(\explain{motion.time}{t} = 0)
Symbols
ttTime(seconds after launch)

A subscript zero on a quantity of motion marks its value at the start of the scenario, when Time is zero: the initial position, the initial velocity. This entry explains the subscript once for every quantity it indexes. A quantity whose value at the start has a name of its own, such as the launch speed, has its own entry instead.

Introduced by: motion.describe-position in motion.position-and-coordinates

Used directly in: Position and Coordinate Systems

Source records:
  • openstax-university-physics-1 — ch. 3, "Motion with Constant Acceleration"
θ\theta
motion.launch-angle

The angle between a projectile's initial velocity and the horizontal ground at launch.

Measured from the horizontal, not the vertical: a low, flat launch is a small angle, and a launch straight up is 90 degrees.

v0v_0
motion.launch-speed

The object's speed at the start of the scenario being analyzed — its initial velocity in a straight-line problem, or its launch speed the instant a projectile leaves the ground.

The symbol has the same meaning for motion on a straight line and for the trajectory of a projectile: the speed of the object at the instant when Time is zero. On a straight line, it is the signed initial velocity.

r\mathbf{r}
motion.position

The object's location at elapsed time t, taken as a vector from a fixed origin so a two-dimensional motion keeps its horizontal and vertical parts separate.

r=(x, y)\explain{motion.position}{\mathbf{r}} = (\explain{coordinate-x}{x},\ \explain{coordinate-y}{y})
Symbols
xxHorizontal coordinate(meters)
yyVertical coordinate(meters)

Velocity and acceleration are defined from position: velocity is the rate of change of position with time, and acceleration is the rate of change of velocity with time. As a vector, the position keeps its horizontal and its vertical coordinate separate. So the horizontal and the vertical motion of a projectile can be analyzed independently, with the same Time.

RR
motion.range

Total horizontal distance a projectile covers before it returns to its launch height.

R=v02sin⁡(2θ)g\explain{motion.range}{R} = \dfrac{\explain{motion.launch-speed}{v_0}^{2}\sin(2\explain{motion.launch-angle}{\theta})}{\explain{motion.gravity}{g}}
Symbols
v0v_0Launch speed(meters per second)
θ\thetaLaunch angle(degrees above the horizontal)
ggGravitational acceleration(meters per second squared)

This formula is correct only if the launch point and the landing point are at the same height and air resistance is zero. The range is symmetric about a launch angle of 45 degrees: two complementary launch angles, whose sum is 90 degrees, give the same range.

tt
motion.time

Elapsed time since the object was launched or released, measured in seconds.

In every scenario of this course, time is zero at the instant the object is launched or released, and time only increases. A scenario has exactly one time origin. So an equation that combines two launches with different time origins contains a modeling error, not a notation error.

□˙\dot{\square}
motion.time-derivative

The rate of change of a quantity with time, written as a dot over the quantity's letter.

A dot over a letter is the time derivative of that quantity: the dot over the horizontal coordinate is the rate of change of that coordinate with time. Two dots mark the second time derivative. The dot is an operator, so the letter under it keeps its own meaning. The unit of the result is the unit of the quantity divided by seconds.

Introduced by: motion.describe-position in motion.position-and-coordinates

Used directly in: Position and Coordinate Systems

Source records:
  • openstax-university-physics-1 — ch. 3, "Instantaneous Velocity and Speed"
v(t)v(t)
motion.velocity

The rate at which position changes with time. It is a vector; in a straight-line problem only its size and sign matter, and that is what the scalar v(t) tracks.

v=d rdt ;v(t)=v0+a t\explain{motion.velocity}{\mathbf{v}} = \dfrac{\mathrm{d}\,\explain{motion.position}{\mathbf{r}}}{\mathrm{d}\explain{motion.time}{t}}\,;\quad \explain{motion.velocity}{v(t)} = \explain{motion.launch-speed}{v_0} + \explain{motion.velocity.constant-acceleration}{a}\,\explain{motion.time}{t}
Symbols
aaconstant acceleration(meters per second squared)
r\mathbf{r}Position(meters)
ttTime(seconds after launch)
v0v_0Launch speed(meters per second)

Velocity is the time derivative of Position, and acceleration is the time derivative of velocity. If the acceleration is constant for the whole scenario, integrating the acceleration over time gives the second formula above. This formula is exact, not an approximation. On a straight line, a positive velocity means that the object moves in the positive direction of the axis. A negative velocity means that it moves in the negative direction.

yy

The signed distance from the origin along the vertical axis, measured positive upward.

One of the two coordinates of the Position in the plane, with the horizontal coordinate. Measured positive upward, it is the height of a projectile above its launch point when the origin is placed there.

SI
The International System of Units — the metric system this course's units (meters, seconds, kilograms, joules) are drawn from.